automatic 3 phase separator tube centrifuge for lab use with cheap price
Introduction:
Tubular centrifuge has high performance of separate factor, high capacity, and account for small area and easy to handle, it has been widely used in pharmaceutical, health food, drinks, chemical industries to separate the liquid-solid or liquid-liquid-solid materials. It is an ideal centrifuge take advantage of centrifugal methods, the minimum granules is 1 um, which is suitable for distill, condense and clarify the material has small gravity difference, small and few solid granules and high erosion products.
Working Principle:
Technical Parameters :
|
|
GF105
|
GF145
|
|
Drum speed
|
16300 r/min
|
14000 r/min
|
|
Max centrifugal force
|
15750 R.C.F
|
16900
|
|
Drum inner diameter
|
105 mm
|
145 mm
|
|
Drum effective length
|
730 mm
|
770 mm
|
|
Solid volume in drum
|
6 L
|
8 L-12L
|
|
Stuff inlet pressure
|
<0.1Mpa
|
<0.1Mpa
|
|
Output (water flux)
|
1500 L/H
|
2500 L/H
|
|
Motor power
|
3 KW
|
3 KW
|
|
Specification
|
760*450*1680 mm
|
890*580*1670 mm
|
|
Weight
|
400kg
|
700kg
|
Main parts :
1. Drum is composed by upper cover, regulate loop, bottom cover drive the hollow axis and pipe drum. In the drum, there install 4 wing panels, make the liquid easily reach the speed of running corner. Discharge the liquid from the two outlets on the top of the drum, and then the liquid flow into the accumulating tray and tanks.
2. Drum, main axis and flinch joint hang on the belt wheel, the wheel combined other parts composed of machine head. The upper end of the axis support on the buffer and the drum linked by nut. The hollow axis insert in the slide bears and the bearings locked on the machine body. The slide bearings has shock absorber, it can float in the level.
3. Only need loosen the linkage nut between drum and main axis, we can unload the drum from the centrifuge.
4. The outer cover and doors of centrifuge is the shield of drum, it has stuff inlet. After the stuff enter the inlet it can be delivered into drum through gush mouth and hollow axis.
5. The motor install on the top of machine body, drive the belt wheel to make the drum running. Contact stuff part material of the centrifuge is stainless steel.
Product Application
1) Simple structure in linear type ,easy in installation and maintation.
2) Adopting advanced world famous brand components in pneumatic parts ,electric parts and operation parts.
3) SKF Bearing
4) High speed, high separation factor
5) the good effect
Product Tags:
|
|
High Performance 3 Phase Separator Tube Centrifuge 16300 R/Min Drum Speed For Lab Images
|
